Rare Vintage Brunswick Regina Pool Table

Posted on June 17, 2023 by admin

Professionally refinished in 2014, this table is in impeccable condition. 3-piece slate is in excellent condition. The art deco Regina style will fit into any decor as a piece of fine furniture which must be seen in person to be truly appreciated. This table deserves a place in only the finest of home billiards-recreation rooms. This very rare combination pocket pool/billiards table and its original accessories is meant for the most discerning of collectors and respectful players. Serious and discerning buyers only, please. I will consider all reasonable offers.

Vintage antique Brunswick Regina pool table 1930s Art Deco billiard mid century

Posted on December 22, 2021 by admin

Full regulation size table. 9ft table , 50×100 play surface , call it what you like. Table is currently disassembled. Base, side trim boards and all but the top end rails are in great shape and were professionally refinished about 15 years ago. Beautiful ribbon striped mahogany, rosewood top rails. Has all ball return components. They and all underside components are painted light green indicating originals. There are many accessories , a vintage cue rack and old cues and set of balls that go with it. Picture with my finger indicating #1 is one of the older end rails, that has plugged old diamond markers as it was made from an old side rail. Picture #2 with me holding up 2 fingers is the old end rail with logo in poor condition. Picture #3 with me holding up 3 fingers is the table base of the table you are receiving to show its good condition. Pictures with #4 with me holding up 4 fingers is the rest of the rails(side rails) you are receiving to show its good condition. These also have round plugs and markers redrilled , its believed the table was a snooker table that was converted to pocket billiards. All other photos are from when the table was set up. Cloth in good shape if you just want to set it up, but I would consider recovering, someone drew lines with a sharpie for some special type of game. You could flip the cloth which is not ideal but I have flipped cloths in the past to get by till a recover and they play ok. Serial number is 5917 No one seems to know the numbering sceme from brunswick fully. I have years of vintage item and guitar knowledge, and its one of 2 things – 5 is the last digit of the of the year and 917 is the 917th table made that year. Meaning its a 1925 or 1935 cause that would fall in the years these were around, I think its 35 cause of the formed ball return tubes, older had wood troughs. Other case this is the 5917th regina or table brunswick made. Slates are currently in a warehouse on Long Island NY. Rest of the table is in Connrecticut – Danbury area. This is worth it in parts alone. The item “Vintage antique Brunswick Regina pool table 1930s Art Deco billiard mid century” is in sale since Wednesday, December 8, 2021. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “gibson80″ and is located in Ridgefield, Connecticut. This item can’t be shipped, the buyer must pick up the item.

Model: Regina
Modified Item: No
Country/Region of Manufacture: United States
MPN: Does Not Apply
Custom Bundle: No
Brand: Brunswick

Brunswick regina antique Pool Table 1924

Posted on October 28, 2021 by admin

Antique Brunswick Balke and collender pool table. Regina model from 1924. 8 foot pro table.. Table is in great shape. Jumbo frame construction and nice mother of pearl inlay. This table was loved and cared for and should give the next owner another 110 years of quality play. The item “Brunswick regina antique Pool Table 1924″ is in sale since Thursday, September 23, 2021. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “citrisfresca” and is located in Tarrytown, New York. This item can be shipped to United States.

Brand: Brunswick

Incoming search terms:

1920s pool table regina

9′ Antique Brunswick Balke Collender Regina Pool Table with Ball Return +

Posted on March 9, 2020 by admin

9′ Brunswick Balke Collender “Regina” Pocket Billiards Table with Ball Return and Accessories. Recent installation of K-66 Rubber and Gorina Granito Basalt Professional Cloth. Includes Aramith Ball Set, 8 & 9 Ball Rack, 2 Cue Extensions, 4 Used House Cues & Table Cover. Provenance: Studebaker Aviation Division Breakroom, Chicago, Illinois during and after World War II. Original metal name plates. Billiard table industry Billiards Pool. Classification: Year of Manufacture From 1922 To 1925 Sizes available: 9′ Pro options (50″ x 100″ Playfield) Slate: 3 pc. 1″ unframed, 3 piece 1″ framed with 1 1/8 reinforced wood frame; Weight (lbs):1680 Color Options: Golden Oak, Mahogany. Technical Information: Technical Information: From the Billiard Table Catalogue 1922 & 1923 Design Patent June 9th, 1911; manufactured under 22 construction patents issued from 1900 to 1916. Carom, Pocket or Combination One of our new styles of billiard tables on which we have secured design patent because of originality and simplicity. It is a good medium grade of table that will certainly be very popular. Stock Sizes: 4 ½ x 9 Wood and Finish: Furnished in either Quarter-sawed oak or handsomely finished mahogany. The oak is finished in our #6 medium or golden color and the mahogany in our regular No. 2 stock color, rubbed and polished finish, which means that after being given the ordinary cabinet finish it is hand-rubbed to a dull polish. This can be kept clean more readily than any other finish. The massive body of this table is what is known in our factory as the Jumbo frame work, which means that it has unusual strength and great durability. Top molding 5 in. X 3 3/8 in. Subframe 2 ¾ in. At top, 1 ½ in. At bottom x 10 ¼ in. Total frame 14 in. The frame work of this body is built up in what is technically known as compound construction-that is, various kinds of woods tongued and grooved together and double cross veneered on the outside and inside, the outer veneer being handsomely figured in oak or mahogany. Reinforcing blocks at side intersections 5 in. Wide x 2 in. Thick x 11½ in. Secured to end section by ½ in. Iron frame bolt reinforced by hardwood dowels. Square at base, tapering to 9½ in. Double cross stretchers 41 inches x 1 ¼ in. Thick x 6½ in. Braced into reinforcing block. Legs are built up of compound construction, tongued and grooved, doweled and reinforced by corner blocks, double cross veneered, inside and out, and rigidly built into end frame work of body. Leg cap 6 in. Square x 3 1/8 in. The wood construction is all of the very best quality, cabinet made and put together in a most thorough manner. All joints tongued and grooved, strongly doweled and glued firmly together. All mitres absolutely accurate. All corners and edges made perfectly smooth and true. Cushion Rails: Compound construction 5 x 1 ¾ inches thick, with facing 4 1/8 in x 2 ¼ inches, built up of various kinds of hardwoods of different grain to give strength and prevent its being affected by climatic changes. Invisible cushion bolts covered by what is known as Blind Cushion Rails, made in 5-ply thicknesses of material placed in an alternate run of grain with fancy figured veneer on the exterior. Cap rails 7/8″ thick x 2 7/8″. Rosewood top ¼ thick. Inlaid metal fancy name plate, 8 rail bolts on each side and 4 on each end of 4 ½ x 9 table, and 10 rail bolts on each side and 5 on each end of 5 x 10 table. Slate Bed: Bet quality Vermont slate, three pieces to the set. All joints secured with three brass dowels and sockets. No screw holes on playing surface. Regulation slate 1 thick. When so ordered, can be furnished with slate 1 ½” thick, 1″ slate, 1 1/8″ reinforced wood frame; 1 ½” slate, 1 ¾ reinforced wood frame. Cushions: This table can be furnished with any style Monarch perfect angle cushions. Pocket Irons: The pocket irons are our No. 6 style, which are countersunk in the ends of the cushion rails by means of brass sockets. Table has not been restored and plays great. Be sure to check other auctions for antique Brunswick Balke Collender billiard tables, cue shafts and more. The item “9′ Antique Brunswick Balke Collender Regina Pool Table with Ball Return +” is in sale since Monday, December 9, 2019. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “jeffreynv” and is located in Buchanan, Michigan. This item can’t be shipped, the buyer must pick up the item.

1/2 Dozen Used House Cues: 2 Extensions, 8 & 9 Ball Racks
Table Size: 4 ½ x 9′
Table Cover: Light Weight Table Cover Included.
Quantity Type: Single-Piece Work
Year: Circa 1922
Model: Regina
Country/Region of Manufacture: United States
Region of Origin: US
Date of Creation: 1900-1949
Rail Tops: Material: Mahogony & Oak with Inlays
Felt / Cloth Type: Gorina Granito Basalt Professional Worsted Cloth
Inner Rails: Brunswick K-66 Rubber (replacment)
Table Surface Type: One Inch (1″) Slate Thickness (Original)
Wood Used in Construction: Mahogony & Oak, Fancy Inlay and Hand Rubbed Finish
Table Rack included: Standard 8 & 9 Ball Billard Ball Table Racks
MPN: Does Not Apply
Brand: Brunswick Balke Collender
Billiard Ball Set: Aramith

Brunswick Antique Regina Pool Table

Posted on January 31, 2020 by admin

Information below comes directly from Brunswick web site. Table’s Wood & Finish. The Regina is made in handsomely figured mahogany, inlaid with mother of pearl and white holly, and hand rubbed to a dull finish. Table’s Cushion Rails. The cushion rails of the Regina table are made up with what is known as a 3-ply body consisting of three layers of woods of alternating grain glued together to insure the rails against climatic changes. The center piece of these plies is hard maple, the most suitable wood to hold the cushion bolts firmly. The top of the rail is covered with a rail cap of compound construction faced with solid rosewood. The rails are securely fastened to the table by invisible cushion bolts. These bolts are covered by blind cushion rail facing which is built up of 5-ply compound construction and faced with a selected grade of figured Mahogany veneer. The Regina table can be furnished with any style Monarch perfect angle cushion. Table’s Cloth & Playing Equipment. The Regina table is made in what is known as our high grade semi-Jumbo type of construction. The sides of the table are made of five-ply construction and are faced with a selected grade of figured mahogany veneer. The top molding, which furnishes the chief bearing surface for the slate, is made of compound built-up construction and is 4 x 3 3/8 in dimension. The legs are made of 5-ply lumber, solidly glued together and reinforced with glue blocks in all corners. Sides are doweled and bolted into the legs to assure perfect rigidity of table. Table further strengthened by cross stretchers which also furnish additional bearing surface for slate. Workmanship of the whole table is the very best. The Regina table represents the finest table of the semi-Jumbo type obtainable. Table’s Slate Bed. The slate bed consists of three pieces of the best quality slate, regulation size 1 inch thick, with all joints secured by brass dowels and sockets. It has no screw holes on the playing surface, if desired, 1½ inch slate can be furnished. The pocket irons are our No. 6 Style which are countersunk in the ends of the cushion rails by means of brass sockets. Approximately 1923 Brunswick Regina 9 foot Arts & Crafts, Prairie Mission Style billiards pool table. New cushions, New Simonis cloth in the original billiard green. Gorgeous rosewood top rails, new leather pockets that fit the era of the table, 4.5′ X 9′, 3 piece 1.5 slate! Table must be picked up. The item “Brunswick Antique Regina Pool Table” is in sale since Monday, October 16, 2017. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “lightingvp2013″ and is located in New City, New York. This item can’t be shipped, the buyer must pick up the item.

Brand: Brunswick

Pool Table Billiards

Tag Archives: regina